Over the last decade or so, portable jump starters have been replacing jumper cables as the preferred means of jump-starting cars with dead batteries. Portable jump starters are a hit with consumers, mainly for convenience, but they are now a must-have for professionals. More often than not, professionals choose the Jump-N-Carry brand.
Jump-N-Carry is a leading brand known throughout the auto service industry for its professional-grade jump starters. The brand combines reliability, performance, and technology in a line of products that are found in service stations and fleet centers around the country.
Portable Jump Starters: The Basics
A portable jump starter is essentially a battery backup that a consumer or professional can utilize to rescue vehicles with dead batteries. It offers the necessary power to t an engine over even when the car’s battery is not cooperating. Three things stand out here:
1. The Power Source
To do the trick, a portable jump starter needs to have a power source. Portable jump starters come equipped with high-capacity lead-acid or lithium-ion batteries capable of storing a significant amount of electrical energy. Once connected to a dead vehicle, the unit discharges power to initiate starting. Most professional-grade jump starters can store enough electricity to start multiple vehicles before needing a recharge.
2. Ease-of-Use
One of the things that makes the portable jump starter superior to the old method of jumper cables and a running car is ease-of-use. By their nature, portable jump starters are easy to handle. You can carry one right up to the engine bay while you have a short connection to the vehicle.
By contrast, using jumper cables can be significantly more complicated. You need to position the rescue vehicle just so. You need to make sure the two vehicles are close enough that the cables will reach. And if you are in traffic, you need to position the rescue vehicle in a safe way.
3. Connection Method
Despite being distinct and separate technology, jump starters are connected the same way battery cables are. This makes them familiar for routine operation. The positive cable is connected to the positive terminal on the dead battery. The negative cable is connected to a secure metal part of the car body or chassis. This creates the ground that completes the circuit and allows the unit to do its job.
Why Jump-N-Carry Is the Preferred Brand
With the basics of portable jump starters out of the way, it is time to discuss why Jump-N-Carry is a preferred brand among professionals. First and foremost is the brand’s commitment to quality. Jump-N-Carry professional-grade jump starters are not the lightweight and disposable units you find at your local department store or auto parts outlet.
Jump-N-Carry jump starters are designed to endure the rigors of professional use for years. They are designed to be carried onto trucks and passed around busy fleet centers. They are built tough; they are built to last; they are built to be repaired whenever possible.
Professionals also appreciate:
- Raw Power – Jump-N-Carry jump starters offer impressive cranking amp ratings, with some exceeding 1,000 peak amps.
- Integrated Technology – As a Clore Automotive brand, Jump-N-Carry incorporates the latest technologies in its products. This includes smart charging systems and built-in safety mechanisms.
- Portability – Even though Jump-N-Carry products are tough and reliable, they are still portable. They are easy enough to use for virtually any job – on the street, in the auto lot, and in the parking garage.
Jump-N-Carry is a familiar brand in fleet centers and auto repair shops across the U.S. Their professional-grade portable jump starters are hard to beat.